- Hitachi Seiki Z-Axis ITZ Input Off, Z-axis will not move
-
Registered
Hitachi Seiki Z-Axis ITZ Input Off, Z-axis will not move
Hi All,
I am new to CNC machines and apologize in advance for my lack of knowledge.
We have a Hitachi Seiki VA-40, Fanuc 6M Model B CNC.The Z-axis will not move due to the ITZ bit being off. The tooling arm is upand in the straight position. On the electrical prints, the ITZ input is a NOcontact labeled U056. But nowhere does it show on the prints the coil forU056 and we can't locate a relay in the panel labeled U056. What exactly isU056 and where does it come from?
What could cause the interlock bit for Z-axis tostay off? We have no alarm messages onthe display.
We have been banging our heads against the wall tying to figure out why this ITZ bit is off. I don't know what event occurred when the CNC went down. All get told is that it was working fin one day and then the next it wasn't.
Any help would be greatly appreciated. Thank you.
Mark
-
-
Registered
Re: Hitachi Seiki Z-Axis ITZ Input Off, Z-axis will not move
Hello, I can help you, send me a email whit some machine pictures and part number. Jeanluiz@yahoo.com.br
Sent from my iPhone using Tapatalk
- Hitachi Seiki Z-Axis ITZ Input Off, Z-axis will not move
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules