Help - Conquest 42 - turret fault

[ashg1984]

hi there i have a problem with my Conquest 42 powered the machine up , homed out , and it has developed a turret fault, the turret will unclamp but will not rotate to any tool stations any help or advice would be great

[ashg1984]

update tried the turret reset as outlined in the manual and no difference turret unclamps and fails to do anything from there

[Nawrocki4Life]

Seems like the turret index belt is broken. There is a pipe plug on the turret body, take the cover/guards off the turret body and you'll see it. look inside there and check the belt.

[ashg1984]

it was the turret position sensors inside the turret housing that had gone down

[g-codeguy]

Originally Posted by ashg1984 it was the turret position sensors inside the turret housing that had gone down

Thanks for posting the solution to your problem. Too often people don't follow up. It helps those of us willing to learn.