CHNC for part

[Hernthehunter]

I'm in the process of opening up some some space in my shop and have decided to part out my CHNC I. all parts will be sold supercheap mainly cause I need the space. feel free to ask any questions. when I purchased the machine I was told that the servo on the Z axis was bad. I have never powered up the machine so I cannot guarentee any electronic parts. the machine did come with an extra servo motor that appears to have been rebuilt by a shop out of Minneapolis MN.

[JP Hardinge]

May be interested. Your messages box is full.

[Hernthehunter]

I cleared out my pm box

[JP Hardinge]

PM sent.

[Hernthehunter]

I found a bunch of programming and shop manuals for this machine. I even have a VHS tape from Hardinge too

[toyota_400]

I need the stop solenoid and valve body for the turret along with the linkage that connects it to the ratchet lock.

[A1CNC]

What control does it have?

Thanks,
Eric

[toyota_400]

it currently has no control, i will be making my own using EMC2

[mark562]

Is the X-axis tachometer available?

Thanks Mark

[Edwin Murch]

I have a CHNC II with 10TF controler. Servo motor # 1 HU5040-oAF02-F / 16c collet closer / Maybe boards need to see if compatable
Thanks Ed