I got the machine to jog. I had to turn the X axis ball screw by hand in the "+" direction and then it worked. However, when I went through the homing process, the Z axis was fine but the X axis doesn't come close to the dimension that the book calls out before it bottoms out in the X+ direction. The centerline of the turret is supposed to be 3" from the centerline of the spindle, but it is roughly 1/2 to 3/4" short. It doesn't look like it will ever get to that dimension. Now, when I try to home the X axis, it bottoms out and gives me a X axis overtravel fault. Can anyone help??