| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Hardinge Lathes Discuss Hardinge Lathes here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-15-2010, 06:04 PM
| |||
| |||
HI GUYS, Have a superslant 1983 /84 modal (excellent condition) when i jog or hand wheel the end working turret any more than 10" per minute feed the turret ossilates 1/2" for approximately 10 seconds and then the G6 Fanuc control displays alarm Alarm - 423 a) Z- Axis position deviation value has exceeded + or - 32767. b) velocity comand of the DA converter is not between -8191 and + 8191. or Alarm - 424 fault in position detection of Z - Axis resolver or inductosyn. any sugestions AROB =  |
|
#2
04-15-2010, 06:05 PM
| |||
| |||
| Probably a dirty tach on the motor. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| this is not easy | cob | Mastercam | 9 | 02-10-2009 08:15 PM |
| MastercamX not so easy with easy projects | X7racer | Mastercam | 7 | 05-21-2008 09:28 PM |
| How easy is it? | SPD | Employment Opportunity | 26 | 03-03-2007 01:50 AM |
| Easy CNC and Easy Stepp'n | kylecroft | CNCzone Club House | 5 | 02-18-2007 11:54 AM |
| Please be easy, I'm new | sin-city-custom | General Metal Working Machines | 4 | 03-01-2005 10:20 AM |
| | |
EASY FIX OR NOT 
Linear Mode
