- G4 T0101
-
Member
G4 T0101
For my Hardinge Conquest 42 w/live tooling, the manuals and existing programs in the control (OT-C) use the format " G4 T0101" for all tool changes. The purpose of the G4 is not explained anywhere. I know this is normally a dwell command. When doing MDI tool changes, using or not using the G4 makes no difference. What is its purpose?
-
- G4 T0101
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules