Conquest T51 problem threading.


Results 1 to 2 of 2

Thread: Conquest T51 problem threading.

  1. #1
    Registered
    Join Date
    Sep 2008
    Location
    Colombia
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Conquest T51 problem threading.

    We have a lathe hardinge model CS-51 conquest snake T51, Control fanuc 18T.

    The problem is the following.


    When we run some cycle. (G71, G72, etc.) the machine works perfectly.

    But when running the thread cycle (G76), the machine runs the program, but when it starts the thread cycle.
    The Z and X axes do not move, the spindle rotates normally, there are no alarms.

    The program has been proven, previously worked everything perfect.


    The winch is equipped with C-Axis. We have never managed to make it work.
    A technician was trying to run the C-Axis.
    He says he has returned to his normal state. When threading worked but we did not really believe it.

    You could help us with some information, in which direction we can go, to solve this problem.


    thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: Conquest T51 problem threading.

    Check your spindle encoder the parameter it looks at is in the manual



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Conquest T51 problem threading.

Conquest T51 problem threading.