- Problem- Z height parameter
-
Activation process
Z height parameter
HELP!!!
Our machine has gone a bit funny and the spindle doesn't come to the right height for doing tool changes.
The Z home height is still perfect, M25 = Z0.0 at Tool change position it is at 116.503 it looks to be around 7mm need to go down is there a parameter i can use to change this?.
the changer is coming in few millimetres high.
I know that there is a parameter that tells the machine the distance from the Z home but I don't know what it is or how to get there.
Similar Threads:
-
-
Member
Re: Z height parameter
...might help if, knew what machine you have.
- Problem- Z height parameter
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules