High Speed Spreadsheet

[MachineSMM]

I am looking for anyone who might have a High Speed Milling spreadsheet. That will give me speed, feeds, depth of cut and anything else that will come in handy for programming.

I am using Mastercam.

[hardmill]

I tried to download some info but it hurts when i stick the wires
in my ear.

But seriously let me see what i have at work and i'll get back
to you tommorrow eve. PEACE

[JIMMY]

I will get you a spreadsheet tomarrow. I is feed and speeds for some materials. You can e-mail me every once in a while and I will send you an updated one. I up date it as I learn them.

[cadcam]

I have a disk that contains info on mastercam high speed I will get it out and see about uploading some of the info to the FTP.

This disk came from Mastercam office.

[MachineSMM]

I will take any information that I can get my hands on.

[cadcam]

I will get it up to the FTp this weekend and post here when it there.

[MachineSMM]

Thanks

[hardmill]

Sorry for making you wait. I uploaded the files Jimmy sent
me to the ftp site, unspec. uploads folder.
If you need any specific info PM or e-mail me.
PEACE

[MachineSMM]

Thanks

[grantmi1]

This forum rocks and Hardmill your site rocks I am so glad I found all this. I need more.

[CNCadmin]

Originally posted by grantmi1 This forum rocks and Hardmill your site rocks I am so glad I found all this. I need more.

Glad you like : Tell a friend or two

[grantmi1]

Friends? What friends. I am a computer hermit.. Um ya I don't have many friends that machine. You can all be my friends. I am a young whipper snapper that is continuing this high speed revolution