Drill & Tap Combination "DRAP"

Results 1 to 14 of 14

Thread: Drill & Tap Combination "DRAP"

  1. #1
    Registered
    Join Date
    Sep 2003
    Location
    TULSA, OK
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default Drill & Tap Combination "DRAP"

    Anyone used these before? I am having a problem with run a M4-0.7 thru 3/8thk Aluminum. They keep snapping off. Also running 1/4-20 DRAP. Any help would be much appreciated.

    Similar Threads:


  2. #2
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    I've seen them, but have stayed away from them for just that reason. I would think a tool like that would only work on very specific applications. Let us know how you resolve the issue.

    'Rekd

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Member HuFlungDung's Avatar
    Join Date
    Mar 2003
    Location
    Canada
    Posts
    4826
    Downloads
    0
    Uploads
    0

    Default

    To tap that thickness without a chip clean move ( or three) would be equivalent to tapping 75 mm plate with a 24 mm tap without stopping to clear the chips. You can program two or three G84's in a subroutine to provide the chip break and clearing.

    You would be better off to use a seperate tap with a spiral point (for a through hole), or use a cold forming tap.

    For deep threaded holes, you are usually safe to increase the tap drill diameter just a whisker, in order to make it easier to cut threads. Unfortunately, the DRAP locks you in to a process with very little flexability.

    First you get good, then you get fast. Then grouchiness sets in.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  4. #4
    Registered
    Join Date
    Sep 2003
    Location
    TULSA, OK
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default

    Yeah that is what I thought I have already changed to a drill and tap. Just not enough clearance.



  5. #5
    Registered
    Join Date
    Mar 2003
    Location
    United States
    Posts
    106
    Downloads
    0
    Uploads
    0

    Default

    I use them on 11 gauge CRS. Only to avoid a tool change. The part I use them on has 6 1/4-20 holes thru. So I use a DRAP and first drill all 6 holes at 110 SFM then go into tap mode at 60 SFM to tap the six holes. Not much of a time savings but every bit helps.



  6. #6
    Registered
    Join Date
    Jul 2003
    Location
    usa
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default

    I've used an M4 drap on nominally 3/16" tk. Al and don't ever remember breaking one. I did it to save on tool holders--what's your excuse? I spot drilled with an engraving point but a center drill or real spot drill would work also. I wasn't concerned about location as much as a burr-free, countersunk top surface. I drilled through the part at high rpms, then called a G84 which was ridgid tapping mode. This was a very slow operation since the spindle was always changing speeds or direction. You have to use a drap in a hand fed drill press and a tapping head or in a CNC machine with ridgid tapping! A floating tap holder is not going to be ridgid enough for drilling in a CNC and you can't use a ridgid collet or tap holder in a CNC without ridgid tapping.



  7. #7
    Member
    Join Date
    Feb 2004
    Location
    somewhere out there
    Posts
    142
    Downloads
    0
    Uploads
    0

    Default

    i personally use roll form taps with everything i do... sure it takes 3 holders to spot, drill and tap but youd be hard pressed to find a better tap for longevity i like the feature that mazak added into their m640 where you have a full retract style tapping so you can take depth cuts with a tap for chip clearing... i dont know if any other companies offer this because ive worked solely with mazatrol for the past 5 years with only a little fanuc turning and fadal milling experience prior



  8. #8
    Registered WOLOG's Avatar
    Join Date
    Oct 2003
    Location
    HOUMA,LA
    Posts
    352
    Downloads
    0
    Uploads
    0

    Default

    I never use one of those unless the material is less than the length of the drill flutes. I am not sure if those are capable of drilling and tapping at the same time. If they are, I will be surprised.

    Good luck.



  9. #9
    Registered WOLOG's Avatar
    Join Date
    Oct 2003
    Location
    HOUMA,LA
    Posts
    352
    Downloads
    0
    Uploads
    0

    Default

    Maybe I should proof read before I hit send. I mean "material thickness< drill flute length"



  10. #10
    Member
    Join Date
    Feb 2004
    Location
    somewhere out there
    Posts
    142
    Downloads
    0
    Uploads
    0

    Default

    only way i would ever use a drap in thick material would be if it were a fine thread and i was spinning the tap at like 1300 rpm... like i said before roll form works for me... i can tap at 4000 rpm with a 6-32 tap 3/4" deep with no problem



  11. #11

    Default Re: Drill & Tap Combination "DRAP"

    Is there such an animal as a thread forming drap ? (Combined drill & thread forming tap)



  12. #12

    Default Re: Drill & Tap Combination "DRAP"

    i answered my own question; it's not possible to make a combined drap-thread forming tap since the final minor diameter of the threaded hole ends up smaller than the drill diameter. (Thread former displaces material towards inside of hole)

    Lol, would make a good trick question though.



  13. #13
    Member
    Join Date
    Aug 2015
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Drill & Tap Combination "DRAP"

    These work better. They max out at 2.5 x D.

    The tools I'm referencing are on pages 1 - 8.

    https://www.vargususa.com/portals/0/...ex-catalog.pdf



  14. #14

    Default Re: Drill & Tap Combination "DRAP"

    INTERESTING! thanks!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Drill &amp; Tap Combination &quot;DRAP&quot;

Drill &amp; Tap Combination &quot;DRAP&quot;