| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Haas Mills Discuss Haas machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-05-2009, 03:13 PM
| |||
| |||
I'm trying to figure out why my posts do not include any drilling canned cycles. I design my parts using CATIA v5-18, use IMS post processor with the haas.lib and PPTableSample_Inch words table but the code only posts the location of the holes to be drilled, not the actual drilling cycle. Can anyone recommend a better post processor words table for this machine? Also, someone mentioned it could be a problem with the order that the codes are posting (G,M,X,Y,Z,H.....) I dont think this is the case because there are no codes at all present where the drill cycle should be. I've had better luck with the IMS words table but it still has issues as well.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| MACH3 Post Processor for Catia V5 | oddman | Screen Layouts, Post Processors & Misc | 3 | 10-14-2008 06:26 PM |
| Post Processor for Catia and MACH3 | labuda | Post Processor Files | 1 | 10-13-2008 06:17 PM |
| Catia Post Processor | chevdrgtrk | Post Processor Files | 11 | 10-13-2008 04:41 PM |
| Need Help!- CATIA and post processor file | tfosor | General CAM Discussion | 3 | 02-08-2008 03:58 AM |
| tree journeymean and catia post processor | stanglou | General Metal Working Machines | 1 | 04-19-2007 06:39 PM |
| | |
Linear Mode
