| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Haas Mills Discuss Haas machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-11-2009, 05:02 PM
| |||
| |||
HELP!!! I have a Mini Mill that is displaying a low pressure alarm. I have changed the regulator and am still getting the alarm. I have 120 psi at the compressor, and 85 psi at the regulator. Is there a sensor,filter, or anything else that could cause this problem. Thanks for the help.  |
|
#2
11-11-2009, 05:22 PM
| ||||
| ||||
| Most likely a bad pressure switch or wire.. Under cover up near spindle motor..
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- ALARM 120 VF2 Low air pressure... | TurboMike | Haas Mills | 2 | 07-13-2009 03:15 PM |
| Haas alarm 104 on a mini mill, bummer? | indian mark | Haas Mills | 2 | 06-19-2009 07:32 AM |
| Need Help!- DAEWOO 8 Steady rest pressure alarm, External feed hold alarm | doubleeagle | Daewoo/Doosan | 4 | 06-12-2009 03:15 PM |
| Mini Mill door open alarm | paptep | Haas Mills | 9 | 11-21-2005 03:31 PM |
| TSC pressure alarm (151) | crayner | Haas Mills | 1 | 11-15-2005 10:45 PM |
| | |
Mini Mill Low Pressure Alarm 
Linear Mode
