Results 1 to 5 of 5

Thread: Super Mini Mill 2 Buzzing from Air filter/regulator

  1. #1
    Registered
    Join Date
    Apr 2008
    Location
    USA
    Posts
    75
    Downloads
    0
    Uploads
    0

    Super Mini Mill 2 Buzzing from Air filter/regulator

    I have a new Super Mini Mill 2 (less than a year old).

    After I run for 3 or 4 hours, a buzzing sound starts to come from the bottom of the air filter/regulator. The buzzing gets progressively louder, and I have to shut the mill off for several hours to get it to stop.

    If I put my finger under the bottom of the regulator, the air coming out feels moist. I don't have a dehumidifier (yet) on my air compressor.

    Any ideas?


  2. #2
    Registered
    Join Date
    Nov 2007
    Location
    australia
    Posts
    69
    Downloads
    0
    Uploads
    0
    is it the auto drain?


  3. #3
    Registered
    Join Date
    Feb 2007
    Location
    usa
    Posts
    498
    Downloads
    0
    Uploads
    0
    its the auto drain on the filter reg,maybe its dirty,my gets that way sometimes from dirty
    gunky water that runs thru it,the clear bowl should twist off,turn off the air first,than clean
    it all out and put back on,it that fails to work might have to replace the reg


  4. #4
    Registered
    Join Date
    Jul 2005
    Location
    Canada
    Posts
    11,960
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Gabe Newell View Post
    ...If I put my finger under the bottom of the regulator, the air coming out feels moist. I don't have a dehumidifier (yet) on my air compressor.

    Any ideas?
    It is the drain on the water trap doing its job. Carry on using wet air and you are headed for all the annoyance other people have described regarding sticky solenoid valves and tool changer malfunctions.
    An open mind is a virtue...so long as all the common sense has not leaked out.


  • #5
    Registered
    Join Date
    Apr 2008
    Location
    USA
    Posts
    75
    Downloads
    0
    Uploads
    0
    Thanks, all.

    I will clean the bowl and also get a dehumidifier.


  • Similar Threads

    1. Super Mini Mill - decisions
      By TravisR100 in forum Haas Mills
      Replies: 39
      Last Post: 09-01-2009, 11:21 AM
    2. HELP!! Haas Super Mini Mill
      By CountBraden in forum Haas Mills
      Replies: 4
      Last Post: 07-06-2008, 07:20 PM
    3. HAAS Super Mini Mill
      By Ford25 in forum Haas Mills
      Replies: 13
      Last Post: 09-07-2007, 09:01 AM
    4. help with super mini mill please
      By daleman in forum Haas Mills
      Replies: 12
      Last Post: 08-14-2006, 03:32 PM
    5. part for super mini mill
      By daleman in forum Haas Mills
      Replies: 0
      Last Post: 05-04-2006, 02:03 PM

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.