| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Haas Mills Discuss Haas machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-21-2009, 12:18 PM
| |||
| |||
i have a vf-2 powered up on thurs. got 102,117 alarms can anyone help  |
|
#2
06-21-2009, 12:52 PM
| |||
| |||
| 117 Spindle High Gear Fault. Check air pressure. Check circuit breaker CB4 and the circuit breaker for the air pressure solenoids and the spindle drive. Don't ask me how to find these things I am just copying from the Haas alarm list in the manual. 102 is servos off which happens when you get any other alarm.
__________________ An open mind is a virtue...so long as all the common sense has not leaked out. |
|
#3
07-09-2009, 04:54 PM
| |||
| |||
| doesn't sound good. You may need a new gearbox. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| NEED HEELP ALARM #414 Y AXIS SERVO ALARM? | PICMAN | Fanuc | 6 | 04-29-2011 05:20 PM |
| ALARM shuttle drawbar alarm haas | timmydabull | Haas Mills | 27 | 10-30-2009 08:27 PM |
| Need Help!- DAEWOO 8 Steady rest pressure alarm, External feed hold alarm | doubleeagle | Daewoo/Doosan | 4 | 06-12-2009 03:15 PM |
| Problem- Alarm 350, not in my alarm list, any ideas? | ralph@nes | Mazak, Mitsubishi, Mazatrol | 4 | 09-27-2008 01:14 PM |
| alarm 408 servo alarm "serial not RDY", αP18 fanuc mtor code | sting | Fanuc | 0 | 01-01-2008 09:03 AM |
| | |
Linear Mode
