Need Help!- 2006 vf3 tool changer 113 alarm

[mls]

Hello recently my machine gets this shuttle in fault alarm when it first happened it only did it once now it is doing it a few times to get the machine homed out in the morning. Once it tool changes for the first time it seems to be fine.

I have cleaned the chips of of everything I can.

I have switched out the relays k9 k10 to k11 k12 and so on

I took the brush caps off the toolchange motor to blow out and dust and look at brushes.

wiped of toolchanger senser .

I was going to swicth out the senser with on another they look the same but they are labeled different or is this for assembly reasons

last machine says to check parms 62 63 702 I beleive what are they suppose to be

thankyou for your help Mike

[Haas_Apps]

Mike,
Call the Service department at the Haas Factory 805-278-8500

They can point you in the right direction. Please have your machine serial number handy.

[mls]

thank you I have already called them and I have done what they told me I was just seeing if anyone else had any idea

[ilbebach]

Mls has solved the problem ( thats what he said elsewhere)

but hasnt updated here yet...

MJM