Major Discounts

[1ctoolfool]

Check the Haas website or your local HFO,
They have drastically discounted about 30 machines for inventory reduction, some really good deals there.
There were 7 VF3's in different configurations last time I looked.
They have already sold about 10 machines off the list since tuesday
joev

[l u k e]

I checked the Haas site and couldn't find anything, can you give me a link?

Thanks

[1ctoolfool]

should be "inventory reduction" in big giant letters on the opening page,
try this link
http://www.haascnc.com/promos/hotlist.asp

good luck,
joev

[l u k e]

Thanks!

Can someone explain these options
IPS-V/LCD15 V/VQC-V/CCTM-P/CT/TCTM -1FI

[Cory]

Originally Posted by l u k e Thanks! Can someone explain these options IPS-V/LCD15 V/VQC-V/CCTM-P/CT/TCTM -1FI

Luke,

Go to the Haas page for whatever machine you're looking at, click "options", hit ctrl-f, type in whatever the option code is you have there, and you'll see a description of the option.

[l u k e]

Originally Posted by 1ctoolfool should be "inventory reduction" in big giant letters on the opening page, try this link http://www.haascnc.com/promos/hotlist.asp good luck, joev

I never go directly to the home page, all of my book marks are in the wesite somewhere. My bad!

[l u k e]

Originally Posted by Cory Luke, Go to the Haas page for whatever machine you're looking at, click "options", hit ctrl-f, type in whatever the option code is you have there, and you'll see a description of the option.

I checked all the codes and the only option I can find is for the chip auger. I think the rest of the codes are for standard parts..

[Cory]

Originally Posted by l u k e I checked all the codes and the only option I can find is for the chip auger. I think the rest of the codes are for standard parts..

Yep looks like it. That reads to me as:

Intuitive Programming System
15" LCD
Visual Quick Code
Chip Auger

[l u k e]

Any idea what this is?
TCTM -1FI

[Cory]

Originally Posted by l u k e Any idea what this is? TCTM -1FI

10 station toolchanger for a CT spindle TM series mill

[l u k e]

Thanks