![]() | |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Haas Mills Discuss Haas machinery here! |
| This forum is sponsored by: |
![]() |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#4
| |||
| |||
| Slightly under 8000lbs. You need a minimum of 10,000lb foklift with 8feet forks; it is better to go with 12,000 or 16,000lbs. The big problem with lifting these things is not weight it is the location of the center of gravity way out on the forks; especially if you come in from the front. A 10,000lb forklift will lift okay from the back, a bit wobbly from the sides and from the front it is possible it will tip.
__________________ An open mind is a virtue...so long as all the common sense has not leaked out. |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1992 Fadal 4020HT startup Z and C axis errors | Gerald Sande | Fadal | 11 | 07-19-2009 09:54 PM |
| 1992 hitachi seiki seikos m control | masterfabr | CNC Machining Centers | 2 | 03-30-2008 07:55 PM |
| Need 1992 Haas VF0 drive board ASAP! | jrudicel | CNC Machining Centers | 0 | 09-28-2007 09:05 PM |
| Upgrading a 1992 32 MP control | chipsahoy | Fadal | 6 | 09-26-2007 01:27 PM |