CNC Magazine Subscription - How to get it?

[xiondavis]

So, I've signed up multiple times on the Haas website, sent emails to Haas, called my HFO, but there doesn't seem to be any way to get the CNC Magazine mailed to my shop... (Although the monthly bill doesn't seem to have a problem getting there )

Anyone got any ideas to get the magazine? Maybe a ploy by the HFO to get me to come in and buy another machine? I like the magazine and the tips inside, but I hate reading it online and I don't drive by the HFO but once a year.

-James

[extanker59]

I have the same problem- so no solutions. I suspect that we are too small to get a magazine since they only print up a limited number?

[Geof]

Maybe Haas works the averages; we get three or four copies.

[extanker59]

Lol

[xiondavis]

I guess the way to get it is to complain about it on this forum Got an email from Haas, subscription is now setup Thanks to whoever worked it out!

-J

[Geof]

Originally Posted by xiondavis I guess the way to get it is to complain about it on this forum Got an email from Haas, subscription is now setup Thanks to whoever worked it out! -J

Your every post is being monitored, Big Brother is here.

[extanker59]

Can Big Brother send me a magazine?

[Vern Smith]

Like wise, I've made at least three attempts with no results, hopefully this thread will do the trick! Maybe I should ask first, is it worth getting?

In case HAAS is listening my TM-1P machine serial# is 1055218

Vern

[Geof]

Originally Posted by Vern Smith ... Maybe I should ask first, is it worth getting? In case HAAS is listening my TM-1P machine serial# is 1055218 Vern

It is free so of course it is worth it.

The serious answer is I think yes. I have seen several interesting articles of general interest not specifically focused on Haas products.

[Vern Smith]

Good, then picking up on your previous post let's hope "BIG BROTHER" is listening. Just a point of reference, are you posting from east of the prime meridian or lost at sea? Looking at the clock, I'll guess you are in familiar territory.

Vern

[Mic6]

I've done the same thing, signed up online repeatedly. Now I just stop by the HFO and pick it up after checking on the haascnc website to see if the new issue is out. It's quarterly I believe. It should definately be monthly!

[Haas_Apps]

The magazine is quarterly - unless we do not have enough to make a complete issue. It may take a bit of time to get your subscirption.
I do know that we have had our web server crashed recently. Some things are lost while we are still restoring others from our backups. You could try requesting again from our web site or send us an email.

http://www.haascnc.com/cncmag/lit_req.asp

You can also look at the magazine on the web site.