Haas Pull Studs

[rrbmachining]

I have a VF2 with a CAT40 spindle, Im having trouble sorting out the correct pull studs for my tooling which has a metric M16 thread. Any help would be appreciated

Richard
RRb Machining Services
United Kingdom

[Donkey Hotey]

My machine has a sticker right on the front of the machine with the dimensions of the proper pull stud. I think it's also in the user manual. Do you not have either of those?

[rrbmachining]

Unfortunately the machine hasno such sticker and I dont have manuals

[Donkey Hotey]

The manuals can all be downloaded here:
http://haascnc.com/custserv_updates.asp#custserv

This is the mill user manual:
http://haascnc.com/customer_service/...mc/96-8000.pdf

The dimensions for the pull studs are on page 47.

[dcoupar]

Here's the info from the manual.

[shay z]

you must call haas service and by the serial number of the machine the will tell you what is thr right pull stud.

be careful begause wrong one gan cause a lot of damage.

[MikeOD]

Haas sells CAT40 pullstuds with both metric and standard threads through the HFO's. They're probably not going to cost you any more than they would from an outside vendor.