Need Help! Alarm 971 Fail to Load - CNCzone.com-The Largest Machinist Community on the net!

automizer · #1 04-13-2008, 01:19 PM

I just started my machine up 10mins ago and got
Alarm 971 Fail to Load
The on board device computer failed to load network drivers

Help!
I have no idea what to do, I can't use my disk drive USB drive or hard drive

automizer · #2 04-13-2008, 06:52 PM

So i figured out the problem. My machine was cold.. after running my total machine warm up cycle twice it all magically worked

keshi123 · #3 04-12-2010, 01:59 AM

Hallo,

i come across alarm of Fail to load on my VF4D VMC machine, Please suggest what may be the problem

Thanks

Keshav

Haas__man · #4 04-12-2010, 10:07 AM

It sounds like a software problem to me. What software version do you have? The software version can be found when machine is first turned on. will probably start with a 13, 14, 15, 16.
Also - do you have ethernet option?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEED HEELP ALARM #414 Y AXIS SERVO ALARM?	PICMAN	Fanuc	6	04-29-2011 05:20 PM
Lube Fail	CC714	Fanuc	2	01-24-2008 10:39 AM
alarm 408 servo alarm "serial not RDY", αP18 fanuc mtor code	sting	Fanuc	0	01-01-2008 09:03 AM
Testing encoders? When/Why do they fail?	fergusda	Machine Problems, Solutions , Wireless DNC, serial port	7	12-22-2006 12:42 PM
V2XT startup fail error-1	photoron2	Bridgeport and Hardinge Mills	11	10-05-2006 11:21 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)