Need Help!- Engraving on Haas VF-1

[pitbull]

It has been a while since I engraved anything, but with that being said, I have just wrote a program and it gives me a 301 alarm code. (invalid G code). Here is what I wrote.
G47 P0 X0.0 Y0.0 I0.0 J0.5 R0.1 Z-0.04 E3.0 F10.0 (TEXT)

Can anyone tell me why the heck I am getting this alarm.

Thank You
Pitbull

[Geof]

Are you absolutely sure you typed G47 in the machine?

[pitbull]

Absolutley Positive.

[Geof]

If you take out just the G47 line do you still get the alarm? Maybe it is not the G47 it is another G code in a different place in the program.

I am pretty sure all Haas mills have G47 as a standard feature so it is a puzzle if this G code is not recognized.

[pitbull]

I just went out and took the G47 out of that line, and I do not get an alarm, but the machine just sits their and does nothing.(of course)
I put G47 back in the line and I get the same alarm. (Invalid code)
I am at a loss.

Thank you for your responces,
Pitbull

[gar]

080403-2056 EST USA

What year was the machine made?

.

[pitbull]

The machine is a 1995