Thru Spindle Coolant - CNCzone.com-The Largest Machinist Community on the net!

Doubleddaved · #1 03-24-2008, 06:30 PM

When running my vf8/50 in memory I have no control of aux. tsc (Thru Spindle Coolant). In memory it starts on a m88 and only shuts off when it reads a m89.So when I want to take a measurement while in memory the tsc is still blasting out at 1000psi.The aux coolant button only works when not in memory.
Does anyone know if there is a setting for this?How does everyone else deal with this?
Thanks
Dave

WOLOG · #2 03-24-2008, 06:49 PM

Check the door switches behind the door in the enclosure. If they moved, you can not use the AUX coolant button.

Matt@RFR · #3 03-24-2008, 08:21 PM

For this I go:

.....program.....
/M89
/M0 (VERIFY x DIMENSION)
M88
M3 Sxxxx
.....rest of program......

The control software forces the spindle to be stopped when the TSC is either turned on or off and that's why you can't shut it off with the button when running a program.

Moparmatty · #4 03-25-2008, 06:40 AM

Put the machine into jog away mode and the AUX Coolant button will work and stop the spindle and coolant flow.

Matt

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem- thru spindle coolant leaking	GARY DAVIS	Fadal	4	03-25-2008 07:28 AM
thru the spindle coolant?	cnc@52	Haas Mills	4	09-16-2007 12:03 AM
Through Spindle Coolant	Josh-PTP	Haas Mills	1	02-28-2007 11:42 AM
Through Spindle Coolant Query	intelsingh	Haas Mills	6	06-05-2006 08:29 AM
Spindle coolant what are you using?	carbidecraters	Fadal	2	04-18-2005 08:43 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)