Haas' new Mini Mill 2 model at Westec

[HAILINHAAS]

This machine is going to be a top seller.

More travel with sidemount toolchanger 24 + 1

Very nice looking machine.

Those of you interested better get ready to place your orders.

You might have to wait .. I think the demand is going to be big for this machine

[joecnc2006]

And Why are you cross posting?

[katiebo]

Is this a completely new model or a replacement to the existing super mini or regular mini.

[HAILINHAAS]

A new model

Originally Posted by katiebo Is this a completely new model or a replacement to the existing super mini or regular mini.

[HAILINHAAS]

The power of conversation

Originally Posted by joecnc2006 And Why are you cross posting?

[katiebo]

Is the z axis travel going to be increased from the current 10" (14" with option)?

[HAILINHAAS]

Originally Posted by katiebo Is the z axis travel going to be increased from the current 10" (14" with option)?

20x16x18.5 x,y,z

[katiebo]

What price tag is Haas going to hang on this machine?

[HAILINHAAS]

Originally Posted by katiebo What price tag is Haas going to hang on this machine?

????????

[Geof]

Originally Posted by katiebo Is the z axis travel going to be increased from the current 10" (14" with option)?

On the existing MiniMill the Z travel is not increased, just the height. The entire top of the machine is lifted up on a spacer between the base casting and the column casting. It is very useful for vise or rotary work but means you cannot reach closer than about 3 inches above the table with standard length tooling.

The travels in Mini2 look very good if it is in the same footprint.

[katiebo]

Originally Posted by Geof On the existing MiniMill the Z travel is not increased, just the height. The entire top of the machine is lifted up on a spacer between the base casting and the column casting. It is very useful for vise or rotary work but means you cannot reach closer than about 3 inches above the table with standard length tooling. The travels in Mini2 look very good if it is in the same footprint.

Agreed! Makes one wonder if the VF1 is going to be put out to pasture or relegated to the department of redundancy department.

[HAILINHAAS]

VF-1 will have the gearbox and more rigid frame .. more options ... there is a market for it