| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Haas Mills Discuss Haas machinery here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#3
 
01-11-2008, 02:27 PM
| |||
| |||
| well, my post processor post out a g43 before a tool change and as I look through the haas g codes there is a g44. I was wondering why you would use that? My fadal (format 1) does not require a g43/g44 command when there is a tool change so I am unfamiliar with this command. The G43 positive and G44 negative throws me for a loop. My haas post processor posts out a g43 when there is a tool change.    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
