HAAS SL20 programmers help

[HAASboi]

Im newbie in CNC programming. firstime to operate and program HAAS machine.I input this program to HAAS SL20 Lathe.the program cycle wont start G-code wrong.what HAAS G-code should i used?

N1 G10 PO Z 363.525;
G00 X220. Z100. ;
G50 S1500 ;
G96 T0101 MO4 S300 ;
X45. Z3. ;
G94 X-2. Z23. F.25 MO8 ;
Z2.;
Z1.;
Z0.;
G0 X42. Z2. ;
G71 U2. R.5 ;
G71 PO1 Q05 U2. W.2 F.32 ;
N01 G0 X30.6 ;
N02 G01 Z0. ;
N03 G03 X32.7 Z-1. R1. ;
N04 G01 Z-108.1 ;
N05 G02 X35.9 Z-112.2 R15. ;
G70 P01 Q05 F.38 ;
G00 X220. Z100. MO9 TO ;
G97 SO ;
M01;
;
;
N2 G10 P0 Z290.025 ;
G0 X220. Z80. ;
T1010 ;
X5. Z7. ;
M00;
;
;
N3 G00 X220. Z80. ;
G50 S1600 ;
G96 T0303 MO4 S300 ;
X42. Z-107. ;
G71 U1.5 R.5 MO8 ;
G71 P01 Q05 U1. W1. F.3 ;
N01 G0 X35.6 ;
N02 G01 Z-156.5 ;
N03 G02 X38. Z-158.9 R3. ;
N04 G01 Z-183.1 ;
N05 G02 X42. Z185.1 R3 ;
G70 P01 Q05 F.25
G00 X220. Z80. MO9 T0 ;
MOO;
;
;
N4 G10 P0 Z366.225;
G0 X220. Z150 ;
G50 S1500 ;
G96 T0101 MO4 S300 ;
X45. Z3. ;
G94 X-2. Z3. F.25 MO8 ;
Z2.;
Z1.;
Z0.;
GO X43. Z2. ;
G71 U.2 R1. ;
G71 P01 Q08 U.2 W.2 F.3
N01 G0 X26. ;
N02 G1 Z0. ;
N03 G03 X28. Z-1 R1. ;
N04 G1 X28.89 Z-25.35 ;
N05 G02 X35.7 Z-28.3 R3. ;
N06 G1 X36.4 Z-49.54 ;
N07 GO2 X40.9 Z-52.4 R3. ;
N08 G1 X43. Z-83. ;
G70 P01 QO8 F.25
GO X220. Z150. MO9 T0 ;
M05;
M69;
M30;

[Geof]

In a lot of places you have the letter O not the number 0.

On your first line you have PO

On the fourth line MO4

You will have to correct all the places with O that should have 0

[WOLOG]

Why don't you post a few prints and I am sure someone will be more than happy to generate good code for you to study.

[HAASboi]

thanks for your help geof and wolog i'll fix this code later.I got this program from other CNC lathe I operate (TAKISAWA EX108 lathe) Fanuc 21 i TB control

[alain aleman]

Originally Posted by HAASboi thanks for your help geof and wolog i'll fix this code later.I got this program from other CNC lathe I operate (TAKISAWA EX108 lathe) Fanuc 21 i TB control

Hi Haasboi, your problem is that used Fanuc post-processor. You have to do some changes in the G71 cycle and the syntaxis or you can find around a haas post-processor.

Regards,

Alain