chip auger at tm-1 home made

[pit202]

there is nothing do describe , so I put photos and a movie. enjoy.
http://img116.imageshack.us/img116/887/img1031ac9.jpg
http://img158.imageshack.us/img158/9292/img1035qq0.jpg
http://img479.imageshack.us/img479/4958/img1037cf3.jpg
http://img233.imageshack.us/img233/8027/img1038sg4.jpg
http://img232.imageshack.us/img232/2413/img1039ox1.jpg
http://img128.imageshack.us/img128/2253/img1040hg3.jpg
http://img105.imageshack.us/img105/783/img1041bl2.jpg
http://img104.imageshack.us/img104/5840/img1044qo4.jpg
http://img104.imageshack.us/img104/7517/img1045ah8.jpg
http://img167.imageshack.us/img167/2096/img1049pa0.jpg
http://img167.imageshack.us/img167/4316/img1050tb7.jpg
http://img103.imageshack.us/img103/629/img1051yx3.jpg
and the video :
http://d.turboupload.com/d/1009815/wyciag.wmv.html

[ZipSnipe]

Nice work!!, did you fab the screw? And how? Or where did ya get it?

[pit202]

thanks , here : http://www.allegro.pl/item130273509_...limakowy_.html
my has 140cm length 98mm diameter and cost about 55€

[Geof]

Originally Posted by ZipSnipe Nice work!!, did you fab the screw? And how? Or where did ya get it?

Zipsnipe; if you Google for 'helicoid flighting' you might be able to find a source closer than Poland. This is just the spiral that has to be welded onto a shaft.

[CNCgr]

Nice! I can't see the coolant drain, what did you use to keep the chips out?

Nikolas

[pit202]

I`ve made multiple holes about 2.5mm diameter on the other side as the motor.

Geof , Poland isn`t so far ;-)

[mpstech]

Are those haas covers on the Y-axis slides or where did you get them ?
How much ?

[rhino]

nice work!!!

[pit202]

> Are those haas covers on the Y-axis slides or where did you get them ?
yes, they are , and Z too , this was about 2k€ and this was too expensive for this few pieces of sheet metal for me , if I new how it look before , I`ll be never buy them.

> nice work!!!
thanks , and this works fine

[DSL PWR]

If any of you live in a farming area, you could get some grain auger flighting on the cheap.

pit202 could you upload the video again, as I'd love to see it in action.

[pit202]

> pit202 could you upload the video again, as I'd love to see it in action.
yes, if I only get back from work.

> skype me -----> dsl_pwr
can You speak polish ?

[DSL PWR]

I can't speak polish.