auto air gun plug

[riverracer]

we have installed a 24v soleniod opperated by codes m51/m61, as per previous posts on here. works great.
so now we want to hook up the "auto air" to be controlled by m83/m84/shift coolant.
P66/m27 is a 110/120v supply from the board on the top 2 socket pins.

can anybody tell me where to get the 4 pin plug from? (apart from HAAS)
a part number/brand of a simallar plug would help?
have looked in a few catalogs here, but can only find plugs with larger pin spacing.
needs to be 4mm(5/32") spacing, can only find 6.2mm(1/4").

thanks

[Wrknfrmhome]

Molex minifit jr. 4P
http://www.molex.com/elqNow/elqRedir...9012040_sd.pdf
I don't know where they sell them in Australia though - most electronic catalogs have them here in the states. Try Digi-Key, Mouser, Jameco - The plugs are usually sold in quantities of 10 or 20 because they only cost around$0.25 USD each. Might be just as easy to order just the 120V solenoid that comes as part of the auto air gun kit (32-5620 Valve, 33-2071 Extension Cable to P66)

[riverracer]

looked on the net with the name 'Molex minifit jr. 4P' and found they were used on the older ATX style on computer power supplies.
went and seen our IT dept. and they had a few (10+) laying around.
also found a local supplier using the part# from the pdf, 0.75c each, pins extra...

just waiting on our maint dept to wire it up now.