Select "all" then send
I have two 2006 HAAS machine centers. Both are connected to my PC via RS232 cables. The data transfer from the PC is completed using NCNetlite7.0. I have bi-directional communication. I can transfer one program at a time. I'd like to be able to transfer multiple programs two and from the machine center. Thanks in advance.
It will send all the machine files to the pc as one huge file. Then you can break them apart as needed.
yeah - it will put them in one huge flowing file.
If you want to send out multiple files and have them stay separate then you have to just type each name on the Haas(the O(letter) name - O####)
O1133 O1135 O1136 ETC
Then send them.
Not sure if I was clear, but you can type in all the programs one after another...THEN hit send and it will send all separately.
Become one with the Haas manual. There are a lot of tips and tricks in there for these machines.