After getting fed up with the amount of coolant that was constantly raining out of the large opening in the top of my VF-3 I decided to make a custom top cover / splash guard. My VF-3 is a 2000, not sure if the newer machines have the same opening in the top or not. I would be happy to send the .dxf to anyone who has a similar year machine and want's to make one. Send me a message here if you want it.
Last edited by JasonR; 02-24-2012 at 01:57 AM.
I had to do this early on with my TM-1P. There is no top covering whatsoever on the TM enclosure and the moisture escaping out the top made a mess of everything within 10 feet of the machine. Mine are clear acrylic for lighting purposes and not nearly as neatly made as yours