Need Help!- Haas ec300 move

[johnmckeown]

We have a ec 300 and are relocating our shop, does anyone know the location on the blocks to hold everything in place when we move this as haas has not been so helpful on this.

thanks john

[Pondo]

They give you a little gray plastic tote to put the brackets in with the machine. Usually the tote is jammed under or behind the machine.

[johnmckeown]

Pondo

I Have the blocks but where do they go?

thanks John

[JohnJW]

Horizontal are out of my league, but there are some installation manuals on Haas's website that I've used to move and setup the VF-2SS. The vertical machine installation does show the location of the transportation brackets and the subsequent electrical and mechanical setup. It's probably just as detailed for the horizontal machines.

The manuals are at,

Haas Automation Inc. - CNC - Customer Service - Operator Manual Update

The one for the horizontal mill is at,

http://haascnc.com/pdf/Horizontal%20...stallation.pdf

hope this helps,

[johnmckeown]

thanks johnjw

the installation manual did have the location , you da man

J.