Need Help!- Scaling

[caddisfly]

Hello,

We have a new VF-6.
I would like to use the scale function in my programming.

After reading the manual and reviewing some examples , I
added the scaling coding to an example simple program. The machine alarmed out at the scaling coding
alarm ( 310 invalid g code).
Eventually gave up and took an example program listed in the manual

O0010 ;
T1 M06 ;
G54 G90 G00 X0 Y0 ;
G43 Z0.1 H1 ;
S500 M03 ;
G51 X1.5 Y1.5 P2.;
M97 P10 ;
G28 G91 Y0 Z0 ;
M30 ;
N10 G00 X1. Y1. ;
G01 Z-0.5 F15. ;
X2. F20. ;
Y2. ;
G03 X1. R0.5 ;
G01 Y1. ;
G00 Z0.1 ;
M99 ;

Still get the same alarm at the scale code.

Is there a parameter that needs to be set activating scaling?

Any advise is welcome.

thanks
caddisfly

[doc0302]

hi
i think thats an option that you have to buy it usually comes with the probe option . do you have a probe ?
at the haas site the price is " Coordinate Rotation and Scaling $1,295.00 "

[caddisfly]

Originally Posted by doc0302 hi i think thats an option that you have to buy it usually comes with the probe option . do you have a probe ? at the haas site the price is " Coordinate Rotation and Scaling $1,295.00 "

Thanks for the response doc0302 .

For some reason I thought that was part of the macro option.
I guess not.

Thanks
caddisfly

[behindpropeller]

Originally Posted by caddisfly Thanks for the response doc0302 . For some reason I thought that was part of the macro option. I guess not. Thanks caddisfly

You can probably turn it on for your trial. Its in the settings.

Tim

[KenFoulks]

It is parameter 57 bit 17.