Haas HL-4 ERROR Codes

[wms]

Haas Apps,

Just to let you..we do appreciate you stopping by and offering up any help you can..

Stop by often and offer what you can or allowed to..

I agree with the phone call thing..I myself have called the factory many times.. cost nothing...they even return my calls..and I have never had them not figure out what I needed to know..and very polite and knowledgeable too..

Thanks,
WMS

[gar]

050822-2051 EST USA

altcan:

Have you resolved your problem yet? If not what is your latest status?

.

[gar]

050912-2003 EST USA

altcan:

I would like to learn what your status is? Have you solved the problem? If so how? Feedback is always useful.

.

[altcan]

Hi guys, just an update! Sorry I havent been on here keeping in touch. This Lathe just keeps getting put on the back burner as we are too busy to go out and play with it. We just about got it back up when some kids shot an insulator on a power line and knocked out the power on the whole city. Now we have to start over. What we had to do to get in to the programing mode was to hold the PRGRM CONVRS button while powering up. Then you enter fc80000 17ffff or fc 80000 1fffff Then you have to go in and check every last one of your parameters. Some will still be correct but some will have changed. We just about had them all done when the power got knocked out. On a personal note I will be taking a week off here and there working on my Gyro Copter pilots licence so dont get too excited if I dont respond for a while. I will keep you all updated when ever I can. Thanks boys for all your help, it is all very much appreciated!