Need Help!- VF2SS dimensions

[gizmo_454]

I know that Haas has dimensions on their site regarding physical dimensions of the VF2SS machines. There are some discrepancies, though, between the online dimensions and the ones in their printed pamphlet. Mainly, the min and max heights. Whether or not the dimensions are from the bottom of the casting to the top of the machine, or from the floor to the top of the machine, with the machine set on it's feet and adjusting screws.

My goal here is not to debate which is correct or not. My goal here is to see if anyone has a VF2SS that they could physically measure to see what the top of the tool changer measures. I have to come in a 93" door and under a 93" beam down the middle of our shop. Does anybody know for sure if it will fit?!

Please let me know.

Mike

[Matt@RFR]

As it sits on the shop floor, my toolchanger is 92.75". However, getting the machine inside won't use that number. I don't really remember the specifics of why, but the door I brought mine through is about 98" and I have a small mark on the top door trim where the machine BARELY squeaked by. I'm sorry, but I don't remember what hit.

[KenFoulks]

The forks on the forklifts used to move machines can vary between 1" and 5" but there are some low-profile "dollies" that can be used to scoot the machine through the door.