post for tm1

[laurencen]

hi, anyone got a post for mastercam 9 for the tm1 Haas how do you remove the a entry after g28 at the end of the program when generating too paths

[CJH]

If you have a post for a generic Haas VMC, that will work. It should be in your post library.

CJH

[laurencen]

the one in mastercan works however it calls for the 4th axis to return home and gives a error, it is a paim when it calls for a tool change and the A comand shows up, maybe there is a way to edit the post to remove the A command, any ideas how to do this

[Pondo]

Here's the one I use for my Minimill and VF-4's. Just change the .txt to .pst

-EDIT- That's for MC9, I'd have to get the MCX post from work if you need it - sorry!

[Pondo]

Originally Posted by laurencen the one in mastercan works however it calls for the 4th axis to return home and gives a error, it is a paim when it calls for a tool change and the A comand shows up, maybe there is a way to edit the post to remove the A command, any ideas how to do this

In the MCAM settings, machine definition, turn off the 4th axis and it should not post any A moves.

[laurencen]

Thanks for the info, looked for the setting to turn off 4d, in configurtting, am I in the right setup areaation can not see this se