| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Haas Lathes Discuss Haas lathe here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-15-2009, 12:37 PM
| |||
| |||
 Haas SL 30 BB I received a tool turret fault error (125) and could not move the machine any direction. I shutdown the machine and tried a auto restart as usual and I am getting a not tool home / high gear stop message. Also when it tries to home the A-axis it alarms out (alarm 106) Does anyone know what I can do to get back up and running?    |
|
#2
06-15-2009, 01:41 PM
| |||
| |||
| does your turret unclamp correctly? Sometimes an error can be cause by low air pressure, a leak in the airline to the turret or a sticky solenoid valve. What is the explanation for the alarms you mention, just the number doesn't give much information
__________________ An open mind is a virtue...so long as all the common sense has not leaked out. |
|
#3
06-15-2009, 06:45 PM
| |||
| |||
| I just cleaned out my turret solenoid valve for the same thing. It is in the back of the machine. I just pulled mine apart, cleaned it, greased it up, and bam...works beautiful. Be very carefull with the little rubber washers/gaskets. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Haas Super Mini-Mill and Haas Trunnion Table | Gabe Newell | Haas Mills | 6 | 06-07-2009 02:23 PM |
| Haas TL-20 or SL-20 | GENMACH | Haas Lathes | 5 | 10-11-2008 01:52 AM |
| HAAS SL20 and HAAS VF2 ProE Posts? | CNC_student | Post Processor Files | 5 | 07-10-2008 03:46 PM |
| HAAS Service HAAS Repair NY NJ CT PA | serviceman | Product Announcements & Manufacturer News | 1 | 01-04-2008 04:27 PM |
| Haas 2 haas serial comunication? | CNCgr | Haas Mills | 3 | 12-22-2006 01:07 PM |
| | |
Linear Mode
