| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Haas Lathes Discuss Haas lathe here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-04-2009, 10:34 AM
| |||
| |||
I fired up our SL-20 lathe this morning and when I go to do a power up restart the turret spins at 5% and will not stop it just keeps spinning. I tried homing it as the A axis in single return same deal. PLEASE HELP  |
|
#2
03-05-2009, 01:24 AM
| |||
| |||
| Almost certainly the microswitch or proximity sensor that tells the controller when the turret is at tool station 1 is faulty. Time to start taking covers off and find the guilty party. If it is a switch it could just be gummed up, if it is a proximity sensor it might just have a chio of metal on it.
__________________ An open mind is a virtue...so long as all the common sense has not leaked out. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Qt-10 turret spinning | laamar | Mazak, Mitsubishi, Mazatrol | 8 | 10-03-2008 03:49 PM |
| Need Help!- Home again Home again Jiggety Jig. Well Not Just Yet! | Mr.Chips | DIY-CNC Router Table Machines | 10 | 03-18-2008 08:58 PM |
| Help on cnc turret | bluelakesheety | General Metal Working Machines | 1 | 12-04-2007 10:40 AM |
| Turret won't home upon startup, pls help | Millenium | Haas Lathes | 5 | 07-21-2007 09:19 AM |
| Bolt on Turret 'v' VDI Turret | scappini | General Metalwork Discussion | 0 | 07-20-2006 06:59 AM |
| | |
Linear Mode
