Wanted Haas barfeeder - CNCzone.com-The Largest Machinist Community on the net!

tweeter166 · #1 07-28-2008, 04:04 PM

Looking for a used Haas bar feeder for my SL-20..
please call if you have one or know where to get one..
765-728-8251 jeremy

dcoupar · #2 07-28-2008, 11:01 PM

You might call Rod at 541-744-2494. He used to have one he no longer needed.

HaasService · #3 07-29-2008, 09:09 AM

Do you have a serial number of your SL-20? You must be careful when purchasing a used Haas bar feeder as there are a few compatibility issues. The older lathes without the "S" I/O pcb is not compatible with the brushless bar feeder. You will need to purchase the brush bar feeder that operates with a servo controller. The brush and brushless are both great designs and work about the same from an operators point of view. Good luck.

Geof · #4 07-29-2008, 09:15 AM

Build your own.

big_mak · #5 07-29-2008, 05:24 PM

No pics or schematics Geof?

Geof · #6 07-29-2008, 05:54 PM

Originally Posted by big_mak

No pics or schematics Geof?

I don't give out schematics. If you can't do it from a phot and description you are no Machinist

.

http://www.cnczone.com/forums/showthread.php?t=42759

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WANTED HAAS VF-O, VF-1	1998cor	Haas Mills	0	02-05-2008 01:27 PM
300 barfeeder problem	metaltec	Haas Lathes	2	11-06-2007 03:27 PM
lipe barfeeder	wdzhere	Fanuc	2	09-05-2006 07:19 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)