| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Haas Lathes Discuss Haas lathe here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-31-2007, 02:41 PM
| |||
| |||
I am having a problem with the barfeeder on SL20 not being consistant with the push . I am using 2.0 SS with chuck jaws. It will push any where from .020-.100 further than the required distance , sometimes not enough sometimes just right . any help Last edited by metaltec; 11-01-2007 at 02:48 PM.  |
|
#2
11-06-2007, 09:46 AM
| ||||
| ||||
| do you have a chamfer on the end of the bar? you can also slow down the max speed of the pusher v max speed parameter. check for backlash in the pusher ballscrew assembly |
|
#3
11-06-2007, 03:27 PM
| |||
| |||
We had the same problem. We slowed down the push speed and havent had any problems with the barfeed since. I am not sure which parameter it was, the tech should be able to guide you through it. It is kind of a shame to have to slow down the speed though, it takes quite a bit longer to load a new bar! Hope this helps you. www.ktechmanufacturing.com |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Home built barfeeder | Fudd | General Metal Working Machines | 2 | 01-28-2008 08:50 AM |
| lipe barfeeder | wdzhere | Fanuc | 2 | 09-05-2006 07:19 PM |
| Problem with BNC Miyano Barfeeder lathe. | Tonenc | Machine Problems, Solutions , Wireless DNC, serial port | 3 | 11-08-2005 07:46 PM |
| | |
Linear Mode
