| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Haas Lathes Discuss Haas lathe here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#13
 
01-11-2008, 03:42 PM
| |||
| |||
| I have been using my TL2 with the full enclosure for a few months now and did have to put in some baffles using 1/4" polycarbonate. One is above the spindle on the headstock and one behind near the back. One goes across the back of the carriage; this one stops a lot of splash out the back where there is no guard. Looking in from the end of the machine when it is running you can see the splash intercepted by this one. To mount it I used a bracket bolted onto the holes that used to hold the apron on the front of the carriage.
__________________ An open mind is a virtue...so long as all the common sense has not leaked out.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Coolant...Which and why? | ajl6549 | General Metalwork Discussion | 15 | 12-08-2008 08:02 AM |
| thru coolant | SIG | CNC Tooling | 30 | 01-16-2008 09:11 PM |
| Coolant leaks | HAILINHAAS | Haas Mills | 13 | 10-30-2007 01:13 PM |
| Coolant or No Coolant when turning.... | Crashmaster | General Metalwork Discussion | 3 | 05-20-2007 01:20 AM |
| COOLANT (what are you using?) | carbidecraters | General Metalwork Discussion | 12 | 01-22-2006 12:31 AM |
| | |
Linear Mode
