Need Help! Quick help with Renishaw probe on new VF7


Results 1 to 3 of 3

Thread: Quick help with Renishaw probe on new VF7

  1. #1
    Member
    Join Date
    Dec 2005
    Location
    usa
    Posts
    258
    Downloads
    0
    Uploads
    0

    Default Quick help with Renishaw probe on new VF7

    Anyone have info on step by step to use the renishaw probe to square a fixture?

    Instead of running the dial indicator down a 80inch fixture I would like to put the fixture on the table reasonably square and probe the far left and far right for example and the controller compensate for the squarness of the fixture to the axis.

    Eric

    Sent from my Galaxy S3 using Tapatalk 4

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2012
    Location
    United States
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    adrian@thecncconsultant.com

    He's my guy for anything Haas vs. Renishaw, but your best bet for probe training is your Haas HFO Applications engineer. If you have a hard time, just call the factory. Haas has some of the best customer support in the business.



  3. #3
    Registered
    Join Date
    Dec 2011
    Location
    united states
    Posts
    94
    Downloads
    0
    Uploads
    0

    Default Re: Quick help with Renishaw probe on new VF7

    I would like to know if you ever got this to work?? I am very interested in this cause I get a lot of huge plates that are close to impossible to move once on the table, I get them close with stop blocks in T-slots but never perfect, thanks in advance!!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Quick help with Renishaw probe on new VF7

Quick help with Renishaw probe on new VF7