VF Schematics?


Results 1 to 4 of 4

Thread: VF Schematics?

  1. #1
    Registered
    Join Date
    May 2005
    Location
    USA
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default VF Schematics?

    Thanks for the advice on tapping polycarb.

    We're in the process of servicing our Vf-1, it experienced a bit of lightning related trauma. We found a blown fuse on one board, replaced it, and the machine ran fine for 3 or 4 days.
    Then we got an alarm for spindle running, when it clearly was not.
    Our spindle drive is a Magnetek GPD503 model DS308.
    The drive had no indicator lamps, nor display. This unit is no longer supported by Magnetek, but it is by Yaskawa, its original manufacturer.
    Yask rep said symptoms indicated failure of electrolytic capacitors on power board, as this board contains the power supply goodies that the control board needs. Changed all the electrolytic caps, no bad ones found.
    No change in symptoms.
    New alarm says low voltage AC in.
    AC voltage in verifies to be normal.
    If I had a real live schematic, we could trace some of this stuff.
    I bought a new set of service manuals from haas when we bought the machine, but they are quite generic, as they cover every single machine haas makes. (eyes rolling)

    That said, is anyone aware of more detailed service and repair documentation, service guy training materials, or...?

    thanks in advance

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2005
    Location
    USA
    Posts
    1498
    Downloads
    0
    Uploads
    0

    Default

    070629-2057 EST USA

    gromit68:

    Read thru my thread:

    http://www.cnczone.com/forums/archiv...p/t-22019.html

    .



  3. #3
    Registered
    Join Date
    May 2005
    Location
    USA
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default thanks Gar

    I have to say what an amazing resource this forum is.
    gar, thanks for the fast response. Anton will be getting my order this afternoon.
    I'll post our results later in the week.



  4. #4
    Registered
    Join Date
    May 2005
    Location
    USA
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default magnetek drive update

    We received our rebuilt magnetek drive for our haas vf1 yesterday.
    It arrived on-time, pre-configured.
    20 minute install, and it works great!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

VF Schematics?

VF Schematics?