VF5


Results 1 to 4 of 4

Thread: VF5

  1. #1
    Registered
    Join Date
    Sep 2016
    Location
    United States
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default VF5

    I have 102 servos off error, 202 302 power supply error and 649 dc bus undervoltage error..

    Anyone had this issue.



  2. #2
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    323
    Downloads
    0
    Uploads
    0

    Default Re: VF5

    how old are Your bateries?



  3. #3
    Registered
    Join Date
    Sep 2016
    Location
    United States
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by steryd View Post
    how old are Your bateries?
    I changed them today .. I thought this might fix the issue.. no luck



  4. #4
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    323
    Downloads
    0
    Uploads
    0

    Default Re: VF5

    check the voltages on DC supply. In VF2 the values was written near the outputs. These supplies are quite rare to fail, but not impossible.
    If there is everything ok with it u need to check the connections of DC lines near the supply, and between the boards.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

VF5

VF5