Newbie Problem with Haas machine


Results 1 to 3 of 3

Thread: Problem with Haas machine

  1. #1
    Registered
    Join Date
    Sep 2017
    Location
    Mexico
    Posts
    2
    Downloads
    0
    Uploads
    0

    Question Problem with Haas machine

    Hi guys,
    Actually I program a lathe haas but recently the monitor freezes and does not change the window and the buttons are disabled, turn it off and on again and still the same, sometimes it is working very well and suddenly stops and no longer allow me to do anything again I turn it off and turn it on and still not working.


    Sometimes are only minutes and at other times hours.
    Someone can point me to failure of the machine.


    Thank you.

    Similar Threads:
    Last edited by Edmon; 09-27-2017 at 01:21 PM.


  2. #2
    Member
    Join Date
    Feb 2012
    Location
    USA
    Posts
    115
    Downloads
    0
    Uploads
    0

    Default Re: Problem with Haas machine

    Ud. Debe decirnos de que ano ES la maquina.

    Mucha de la gente de este forum no habla espanol. Porque no usa ud. Google translate?



  3. #3
    Registered
    Join Date
    Sep 2017
    Location
    Mexico
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Problem with Haas machine

    Hi Erikfriesen

    I'm sorry, i'm think that have translated in automatic because I have the translator activate, sorry

    The machine is:

    VER L02.24N
    MOCON 12.07
    98-01-20
    MODEL: HL1


    Attached Thumbnails Attached Thumbnails Problem with Haas machine-img_20170926_193454-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem with Haas machine

Problem with Haas machine