Need Help! Haas VF1 Error code 103


Results 1 to 2 of 2

Thread: Haas VF1 Error code 103

  1. #1
    Registered
    Join Date
    Jun 2017
    Location
    United Kingdom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Haas VF1 Error code 103

    Hi Im new to the site and have a problem with my Haas VF1. On startup I get error code 103 on the X axis. I have put a reconditioned motor and encoder in and have checked by moving the cables. Problem stays on the X axis. It looks to me like its the board. Would you guys agree. If it is the board is there a way to confirm this and or repair without paying Haas service the usual excessive call out. Any help and guidance with be gratefully received.

    Similar Threads:


  2. #2
    Gold Member LeeWay's Avatar
    Join Date
    Jun 2004
    Location
    United States
    Posts
    6618
    Downloads
    2
    Uploads
    0

    Default Re: Haas VF1 Error code 103

    I don't think you have eliminated the parts you just installed. If they are still bad, then swapping them will not show anything. Running the Y motor from the X drive might, but if that setup works okay, then you are back to the motor you installed being faulty.

    http://www.cnczone.com/forums/haas-m...496-forum.html

    Lee


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Haas VF1 Error code 103

Haas VF1 Error code 103