Check setting #8 program memory lock is set to off
I cannot access the memory for some reason on our VF7 and therefore unable to make simple edits to programs at the control. Any ideas?
Similar Threads:
Check setting #8 program memory lock is set to off
VF2, VF5, ST10, MINIMILL, MINIMILL2, VF3
I checked it and #8 was set to off. I changed it to on and then back off again. It is working now though. I don't know how because the settings are the same as they were. Now if I could get it to access the network. That was working up until about 2 months ago. Gremlins maybe? Thanks for the help.
List programs did take me to the program list page. Once there, I was able to access the usb, floppy, hard drive, but it would not access the memory. It is working now. If i could turn on the macro variables, that would be great.
Thanks