Reply with Quotethe program in the text file does not have the O in the beginning to designate a program it has a 0(number) also i believe the hass will only accept a 4 digit program try some thing like this O1234
Beginning/End markers missing - Help
Hi all,
Been struggling for a day to post this G-code, keep getting the alarm: "FILE BEGINNING/END MARKERS MISSING".
What could possibly be the problem, I have the % markers in and the program name is present, no line numbers in front either. Please see attached the program.
Anyone have any advice, please?
Regards,
Juan
Similar Threads:
Last edited by hwahn; 09-16-2016 at 08:20 AM.
Re: Beginning/End markers missing - Help
the program in the text file does not have the O in the beginning to designate a program it has a 0(number) also i believe the hass will only accept a 4 digit program try some thing like this O1234
Re: Beginning/End markers missing - Help
You have to hit 'enter' after the last % sign. I usually leave another blank line to make sure.
Dyna Mechtronics DM4400, HAAS VF-0E, HAAS Mini Mill
Posting Permissions
