Mikron vce500 system HAAS VF monitor after turning empty
Hi, my name is Francis and I Czech Republic (Europe).
I have a machine Mikron VCE500 Haas VF1 model.
The machine stopped working after turning a blank screen cursor in the upper right corner.
Please help with a problem. HAAS CPU 32-3090 Software Version 9.21N.
EPROM disc I took out pgm bios. Does anyone have saved identical for control.
In the Annex, and send photo CPU eprom pgm. When you turn on the machine CPU plate (HALT LED is lit)
(PGM Led flashes). Have you ever had the same problem. Please excuse my language
I can not really englisch, I hope you understand.
I thank you for the information.
Re: Mikron vce500 system HAAS VF monitor after turning empty
Hi, I need help information I bought a new processor card.
The old card is not working
After installing my new card keyboard does not work, the monitor is OK.
I need to configure a new card and I can not.
Please advice in the Annex are photos and video cards old and new processor cards, can anyone tell me
if the problem is needed in their compatibility.
( new card CNC M9.24N , old card 9.21N )
Thank you for the information Frantisek.
Please excuse my language
Re: Mikron vce500 system HAAS VF monitor after turning empty
hi, please know someone, what should be the position "S1" on the video disc Haas
VF1. The attached photo is marked with a red arrow.
Thank you in advance. Frantisek
Re: Mikron vce500 system HAAS VF monitor after turning empty
Hi.
You have managed to solve the problem. I must have something like that.
Problem in the processor. I write the machine a letter eeeeeeeeee followed and for vecees does not write or keyboard.
Re: Mikron vce500 system HAAS VF monitor after turning empty
Hi. I had to connect my keyboard directly to the processor board to make it work.
The original connection is connect to the video board situated in the middle.
There are two rs232 outputs (photo on fiber 01-29-2016) on the bottom of processor board (nearby the battery)
One of them serve to receive pgm with PC and the second to 5 axis and I used to that for communication.
The keypad communicates on the rs232 interface.
That´s how it works for me, but I can´t guarantee it will work for you.