Spider cool

[magnum500sw]

My programmable coolant nozzle is not working. When the power is off it will move freely , but when I power the machine up it will go to a preset location and not move at all. With g code or hot keys on control. Do I need to turn a parameter on ?

Similar Threads:

• A Substitute for Y Cable in Cool Muscle Motor, Cool Link
• Just IN- Cool Muscle, Cable, Substiute for Y Cable, Cool Link, CM-136
• Spider Files
• Need Help!- Spider Web?
• Just add some spider web!

[haastec]

Parameter 57 bit 11 should be set to a 1 to enable the programmable coolant spigot.

If it on then I would check to see if it is getting power.