would this work? or should i look for something more rugged?
25ft DB25 M/M Cable - C2G
Hey everyone,
I am going to be linking our servo control box to the controller of our VF-4, i talked to our HFO and he said they do not offer the cable we need.
From what they said, i need a sheilded straight through serial cable, i assume we will need male connectors on both ends. I'm sure we're not the only ones doing this, maybe you guys can give me some guidance. I am a bit leery of buying it from places like amazon and getting a terrible product. Also we would need at least 15 or so feet of the stuff, which doesn't seem too easy to come by.
Thanks for any help you can offer,
-Tony
edit: we will be linking the controller to the box so we can index without an operator there.
Similar Threads:
would this work? or should i look for something more rugged?
25ft DB25 M/M Cable - C2G
I have found MonoPrice one of the best and cheapest.
Serial Cables - Monoprice.com
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
That is super cheap, but I don't see anything about it being shielded. They have the m/m for under 7 bucks.
You nailed it, the vf4 is not 4th axis ready. But we don't need a true 4th axis, so this seemed like the best option considering we already have all the hardware...(minus the cable)
Another great source for cables is PCH Cables:
25 Foot DB25 Male / Male Cable
You don't need shielded cable. I've been doing this for years with standard cable and it works great!
Sent from my iPad using Tapatalk HD
I just connected up a couple of HAAS for RS232 and used the 3 wire cable, hardware handshake on both ends jumpered out.
HAAS also point to the 3 wire cable being all that is necessary.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.