Help it's busted!


Results 1 to 6 of 6

Thread: Help it's busted!

  1. #1
    Registered
    Join Date
    Apr 2003
    Location
    Yorkshire/u.k
    Posts
    7
    Downloads
    0
    Uploads
    0

    Angry Help it's busted!

    Help urgently required, where do I get a Magnatek GPD 503 That does'nt cost £3000?? I live in the U.K and need one yesterday.........

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2003
    Location
    Yorkshire/u.k
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Forgot to mention

    By the way, a Magnetek gpd503 is a spindle driver for a VF3 and as with all haas spares cost a arm and a leg. Does anyone know of anywhere in the U.K where I can get one.



  3. #3
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default

    Paxo,

    That could be tough. I'm across the pond, I'm not sure how it works over there, but here it can get difficult to find certain parts..

    Don't give up!

    'Rekd teh not much help but an encouraging word..

    Last edited by Rekd; 07-30-2003 at 08:49 AM.
    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  4. #4
    Registered
    Join Date
    Apr 2003
    Location
    Yorkshire/u.k
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default All's well that end's well

    Just to let you all know that I managed to find some one to sort my spindle driver out, Turns out that Haas don't fit the Magnatek driver anymore and if you want one in the U.K suplied by haas it will cost you £3,000 but... if you get one shipped from the states it only costs $1900. Better still, if you get in touch with yaskawa.co.uk they will recon' your old one for £600. Just show's that with a puter, google and a part number ( turns out the correct part no is gpd515ca033 ) you can save yourself a mint. Also managed to get the phone number of an Haas engineer ( I use the word engineer loosely from past experiance ) to fit it for a small fee......yipee



  5. #5
    Registered Rekd's Avatar
    Join Date
    Apr 2003
    Location
    teh Debug Window
    Posts
    1876
    Downloads
    0
    Uploads
    0

    Default



    'Rekd teh Don't that feel good??

    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  6. #6
    Registered Klox's Avatar
    Join Date
    Mar 2003
    Location
    NZ
    Posts
    507
    Downloads
    0
    Uploads
    0

    Thumbs up



    Paxo,
    I'm happy for you as machine repairs can sometimes put a huge burden on the cash flow.

    Rekd, thanx for the moral support!!!

    Klox

    *** KloX ***
    I'm lazy, I'm only "sparking" when the EDM is running....


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help it's busted!

Help it's busted!